Terpinyl Acetate is found in Pine oil, Cajeput oil, Pine needle oil, Cardamom oil and other essential oils.
It appears colorless to pale yellow liquid with lemon and lavender odor.
Terpinyl Acetate is industrially produced by the ethanoylation of terpineol in the presence of Acetic anhydride.
It is widely used in the fragrance of daily chemical commodities and flavors of food, the contents can be up to 30%.
Foreverest™ SSBR1028 is a food grade SSBR. Which is produced by hexane solution, the solution copolymerization of butadiene and styrene. Using butyllithium as catalyst, the solvents and volatiles are removed by hot water, dewaterer and expander.
It is an equivalent of PLIOGUM® 1028. Which used in bubble/chewing gum base and food contact.
NOTE: PLIOGUM is the trademark of Goodyear
Foreverest™ SSBR1027 is a food grade SSBR. Which is produced by hexane solution, the solution copolymerization of butadiene and styrene. Using butyllithium as catalyst, the solvents and volatiles are removed by hot water, dewaterer and expander.
It is an equivalent of PLIOGUM® 1027. Which used in bubble/chewing gum base and food contact.
NOTE: PLIOGUM is the trademark of Goodyear
The Cedrene is a natural compound which is extracted from Cunninghamia. Contents of alpha-Cedrene at 60% min.Has cedar woody and appeared light yellow transparent liquid.
This grade can be used in cosmetic and soap essence.
Glyceryl monostearate (GMS) is an organic molecule used as an emulsifier in food. A glycerol ester of stearic acid, it is a colorless, odorless, sweet-tasting flaky powder. Glyceryl monostearate occurs naturally in the body as a by-product of the breakdown of fats, and is often found in fatty foods.
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. It coatings had high gloss, even after immersion of coated surfaces in water. The primary advantages of using PVAc as an edible coating are its unique combination of properties and its low cost has been already used in pharmaceutical coatings and as an ingredient in chewing gum. (Approved by FDA 172.615)
PVAc mainly used in pharmaceutical coatings and as an ingredient in chewing gum.
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. It coatings had high gloss, even after immersion of coated surfaces in water. The primary advantages of using PVAc as an edible coating are its unique combination of properties and its low cost has been already used in pharmaceutical coatings and as an ingredient in chewing gum. (Approved by FDA 172.615)
PVAc mainly used in pharmaceutical coatings and as an ingredient in chewing gum.
Dipentene synthetic is a by-product in the production of Terpineol or Champhene. Dipentene is mainly composed of terpene hydrocarbons. because of its refreshing pine, lime aroma and low cost, dipentene is mainly used as cost effective ingredient for household products.
1, 8 Cineole comprises up to 90% of the essential oil of the Eucalyptus oil, hence the common name of the compound. It is also found in camphor laurel, bay leaves, tea tree, mugwort, sweet basil, wormwood, rosemary, sage and other aromatic plant foliage. Eucalyptol with a purity from 99.6 to 99.8 percents can be obtained in large quantities by fractional distillation of eucalyptus oil.
Camellia Oleifera Oil appears yellow oily liquid. The physical properties of Camellia Oil and its component of fatty acids are much similar to those of Olive Oil but it contains more unsaturated fatty acid than Olive Oil
Foreverest™ Camellia Oleifera Oil is natural extracted and cold-hand pressed using traditional techniques from the oil-seed from Camellia Oleifera originated in Fujian, China, it is non-toxic, odor free.
It is excellent ingredient to be used for cosmetic products. The pure extracted oil, which contains 86% oleic oil, fits the human body perfectly.
! Note: Camellia Oleifera Oil is extracted from seeds of Camellia Oleifera, it is different between Camellia Sinensis Leaf Extract. Learn more about botanical information via FRPS or Medicinal Plant Images Database of HKBU.
Foreverest® H51150 is water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.
See also Foreverest® Rosin Based Resins and Foreverest® Polyterpene Resins, we provide the comprehensive resin solution for your specialty formula.
Foreverest® H51000 is water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.
See also Foreverest® Rosin Based Resins and Foreverest® Polyterpene Resins, we provide the comprehensive resin solution for your specialty formula.
Isolongifolenone, appears white or pale green crystal or powder, has light smell like Camphor with woody and amber odor.
Production of fully oxidized with oxygen in the reactor by Isolongifolene, synthesise in the process of filtering, distillation and crystallization. The other method is used Cobalt Acetate as the catalyst, through the processing of distillation, crystallization, filtration.
Natural camphene is found in many plant essential oils, such as Turpentine oil, Cypress oil, Camphor oil, Citronella oil, etc.
Camphene appears colorless to white crystalline solid with camphor-like spicy odor. It is nearly insoluble in water, but well soluble in common organic solvents. It is prepared industrially by the Alkali treatment after the reaction of Hydrogen chloride and alpha-pinene.
Camphene is widely used as the raw material of synthetic fragrance ingredient and food-used flavorings.
Isobornyl acetate appears colorless liquid with woody odor. It is usually prepared by the esterification between Acetate and Camphene under the catalysis of Sulfuric acid. It can also be prepared by using ion exchange resin or activated clay as a catalyst.
It is widely used in fragrance formulation, especially in soaps and detergents and other household products.
Tea tree oil is extracted from the leaves of Melaleuca alternifolia. It appears colorless to light yellow liquid with a green and fresh camphor-like odor. Tea tree oil contains more than 98 compounds, of which 6 chemical types are different from those of plant oil. They include 4-terpineol, terpinolene and 1,8-cineole. Among them, the chemical type of 4-terpineol is the specification for commercial, and its main components can play an anti-inflammatory, disinfect and other medicinal effects. Tea tree oil is widely used in cosmetics and skin cleansing products. Its medicinal efficacy is especially suitable for officinal cosmetic ingredients. According to relevant research, tea tree oil has an obvious curative effect on skin problems such as dandruff, hemorrhoids and herpes.
In commercial production, TTO is prepared as a terpinen-4-ol chemotype.
TIP: FOREVEREST Tea tree oils are extracted from Melaleuca alternifolia while Cajeput oil is from Melaleuca Cajuputi or Melaleuca Leucadendra ( var. cajuputi).
Longifolene is an important tricyclic sesquiterpene in heavy turpentine oil, and its mass fraction can reach more than 65%.
Beta-Caryophyllene is another important sesquiterpene. Longifolene is naturally found in heavy turpentine oil and presents in small amounts in other essential oils. It appears pale yellow liquid with a pine-like odor. It is mainly used for the preparation of isolongifolene.
Isocitronellene is the by-product of Dihydromyrcenol in the reaction processing of isomerization.
Ocimenes are a group of isomeric hydrocarbons, the isomer of Myrcene.
It includes α-Ocimene, cis-β Ocimene, and trans-β Ocimene. Ocimene is naturally found in many essential oils, such as basil oil, lavender oil, and clary sage oil, etc. Ocimene is industrially prepared by pyrolysis of alpha-Pinene under high temperatures.
It appears colorless liquid with floral and green odor and is widely used in fragrance formulation.
Maleic Modified Rosin Resin, Pentaerythritol ester of maleic rosin or Rosin Modified Maleic Resins is a light yellow transparent solid, which is synthesized by the addition reaction between gum rosin and maleic anhydride, then through the esterification with pentaerythritol. It is widely used in ink industry.
Pentaerythrityl Modified Rosinate is the product of esterification of modified rosin with pentaerythrite, which has higher softening point than PERE. It has the property of water-resistance, durability and brightness, which is contribute to the industry of adhesives, paint, inks, stencil and electronic applications, etc.
Pentaerythritol or Glycrol Ester of Maleic Rosin or Rosin Modified Maleic Resins is a light yellow transparent solid and is the product of esterification of modified rosin with pentaerythrite, which has higher softening point than PERE.
It has the property of water-resistance, durability and brightness, which is applied in the industry of adhesives, paint, inks, stencil and electronic applications, etc.
Pentaerythrityl Modified Rosinate is the product of esterification of modified rosin with pentaerythrite, which has higher softening point than PERE. It has the property of water-resistance, durability and brightness, which is contribute to the industry of adhesives, paint, inks, stencil and electronic applications, etc.
Rosin Modified Phenolic Resin is the vacuum treated product of esterification of glycerol (or pentaerythrite) with the polycondensate of rosin, phenol (or bisphenol A) and formaldehyde. It soluble in tar, ester, turpentine oil and similar solvents. Insoluble in alcoholic solvents, partially soluble in petroleum products, mix well with vegetable oils, high softening point, fast drying. Rosin Modified Phenolic Resin can be used for phenolic resin paints (through polymerization with vegetable oils under heat), texture printing inks, the low cost enhancer in bonding capability for pressure-sensitive adhesive, hot-melt adhesive and other bonding agents.
l-Limonene is the optical isomer of Limonene. It is classified as three types: l-Limonene, d-Limonene optical isomers and one racemic.
It is a colorless to pale yellow liquid with strong fruity and citrus odor.
d-Limonene is naturally found in Pine needle oil, Turpentine, Cajeput oil and other essential oils. l-Limonene presents in essential oil of citrus, such as mandarin oil and sweet orange oil.
Racemic limonene is derived from turpentine. It mainly used in food flavour and synthetic fragrances.
Castor oil is a composite triglycerides molecules , which extracted from seeds of ricinus communis. It appears light yellow or colorless color, has tasteless character, contents ricinoleic acid (80~85%), oleic acid (7%) and linoleic acid (3%).
PEHR100E is a kind of super light color tackifying polyols resin, which is esterified from refined gum rosin by pentaerythritol, and through series combined technologies units of catalytic hydrogenation. With benefit of light color, low odor, good heat stability and excellent ageing resistance, CPEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.
PEHR100D is a kind of super light color tackifying polyols resin, which is esterified from refined gum rosin by pentaerythritol, and through series combined technologies units of catalytic hydrogenation. With benefit of light color, low odor, good heat stability and excellent ageing resistance, CPEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.
Glyceryl Hydrogenated Rosinate HG100H is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent ageing resistance, HG is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.
Glyceryl Hydrogenated Rosinate HG100D is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and edible glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent ageing resistance, Glyceryl Hydrogenated Rosinate is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.
