Chemicals A-Z
You could use substance name, CAS or MF as key words to search our available product. If you’re looking for the application of chemicals, visit Application Guide.
Automotive
The automotive manufacturing sector stands out for its significant emphasis on researching and incorporating innovative materials. Take, for instance, the Lynk & Co brand under the Geely Group, inheriting Volvo's commitment to the environment and introducing the 'Three Zeros Health Solution' concept (0 miscellaneous cotton, 0 asphalt, 0 harmful solvents) to the market. AkzoNobel, in treating the interior surfaces of the new KIA electric vehicle model EV9, has ventured into using bio-based coatings for the first time, marking a notable stride in the adoption of such coatings. Regulation 2004/42/EC, governing the restriction of volatile substances in car interiors, has been updated to its latest version. Automakers across the board are increasingly prioritizing the utilization of eco-friendly materials.
The application of pine-based chemicals in the automotive industry is primarily focused on areas such as rubber compounding, paints & coatings, sealants & adhesives.
Adhesives & Sealants
In the automotive industry, adhesives are used to replace mechanical fasteners such as welding, nuts, bolts, etc. Structural adhesives and sealants can not only substitute for mechanical fasteners to connect different types of materials but also enhance the flexibility of rubber components, absorbing vibrations and impact forces. Structural adhesives are currently widely employed in the assembly of battery packs for electric vehicles, allowing the rapid bonding of modules made from different materials and achieving lightweight construction.
The expanding area of in-car entertainment systems in electric vehicles has raised higher demands on adhesives for the bonding of screens and frames.
Learn the leading automotive solution (3rd parties):
- 3M structural solutions for automotive OEM
- Delo innovative adhesives in automotive elecronics
- Henkel in the automotive industry
- Permabond engineering adhesives for automotives
- Unitech for automotive structural adhesives
Coatings & Paints
Solvent-based coatings, water-based coatings, and bio-based coatings are the three main categories of coatings. With formulation improvements, water-based coatings are gradually replacing solvent-based coatings. Bio-based coatings are emerging as a new force, often modified with alkyd resins. Major manufacturers are also responding to the rise of Battery Electric Vehicles (BEV) by launching innovative product lines.
Learn the leading automotive solution (3rd parties):
- Akzonobel for automotive OEM coatings
- BASF for automotive coatings solutions
- Covestro for automotive applications
Learn the rubber compounding and tire manufacturing market.
Rosin Amine (Abietylamine)
CAS: 61790-47-4
SPECS: RA908
Rosin amine is an ammonia derivative of rosin. It is a viscous yellow transparent liquid with ammonia and pine flavor. Rosin amine is soluble in conventional solvents, while insoluble in cold water, p…
Polyvinyl Acetate
CAS: 9003-20-7
SPECS: PVAc-H
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. It coatings had high gloss, even after immersion of coated surfaces in water. The primary advantages of using PVAc as an edible coating are its unique combination of properties and its low cost has been […]
Polyvinyl Acetate
CAS: 9003-20-7
SPECS: PVAc-M
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. PVAc mainly used in pharmaceutical coatings and as an ingredient in chewing gum.
Hydrogenated C5 Hydrocarbon Resin
CAS: 71700-94-2
SPECS: H51150
The water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.
Hydrogenated C5 Hydrocarbon Resin
CAS: 71700-94-2
SPECS: H51000
The is water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.
Pentaerythritol Ester of Maleic Rosin
CAS: 68333-69-7
SPECS: MP170
Maleic Modified Rosin Resin, Pentaerythritol ester of maleic rosin or Rosin Modified Maleic Resins is a light yellow transparent solid, which is synthesized by the addition reaction between gum rosin …
Pentaerythritol Ester of Maleic Rosin
CAS: 68333-69-7
SPECS: M4125
Pentaerythrityl Modified Rosinate is the product of esterification of modified rosin with pentaerythrite, which has higher softening point than PERE. It has the property of water-resistance, durabilit…
Pentaerythritol Ester of Maleic Rosin
CAS: 68333-69-7
SPECS: M4101
Pentaerythritol or Glycrol Ester of Maleic Rosin or Rosin Modified Maleic Resins is a light yellow transparent solid and is the product of esterification of modified rosin with pentaerythrite, which h…
Pentaerythritol Ester of Maleic Rosin
CAS: 68333-69-7
SPECS: M1620
Pentaerythrityl Modified Rosinate is the product of esterification of modified rosin with pentaerythrite, which has higher softening point than PERE. It has the property of water-resistance, durabilit…