Chemicals A-Z
You could use substance name, CAS or MF as key words to search our available product. If you’re looking for the application of chemicals, visit Application Guide.
Other Specialty
Wood Based Activated Carbon (Medical Uses)
CAS: 7440-44-0
SPECS: WIM
WIM is wood based activated carbon, used for injection, medical treatment and medical ingredients.
Wood Based Activated Carbon (Water Treatment Uses)
CAS: 7440-44-0
SPECS: WWT
WWT is a form of wood based activated carbon used for water treatment. It is produced by chemical activation of sawdust using unique phosphoric process.
Wood Based Activated Carbon (Food Uses)
CAS: 7440-44-0
SPECS: WWB
WWB is wood based activated carbon used for purification of process water in beverage industry.
Styrene Butadiene Rubber Copolymer (Food)
CAS: 9003-55-8
SPECS: SSBR1028
Foreverest™ SSBR1028 is a food grade SSBR. It is an equivalent of PLIOGUM® 1028. Which used in bubble/chewing gum base and food contact.
Styrene Butadiene Rubber Copolymer (Food)
CAS: 9003-55-8
SPECS: SSBR1027
Foreverest™ SSBR1027 is a food grade SSBR. It is an equivalent of PLIOGUM® 1027. Which used in bubble/chewing gum base and food contact.
Glyceryl Monostearate
CAS: 123-94-4
SPECS: GMS90
Glyceryl monostearate (GMS) is an organic molecule used as an emulsifier in food. It occurs naturally in the body as a by-product of the breakdown of fats, and is often found in fatty foods.
Polyvinyl Acetate
CAS: 9003-20-7
SPECS: PVAc-H
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. It coatings had high gloss, even after immersion of coated surfaces in water. The primary advantages of using PVAc as an edible coating are its unique combination of properties and its low cost has been […]
Polyvinyl Acetate
CAS: 9003-20-7
SPECS: PVAc-M
Polyvinyl Acetate (PVAc), a synthetic resin prepared by the polymerization of vinyl acetate has good potential as an edible coating. PVAc mainly used in pharmaceutical coatings and as an ingredient in chewing gum.
Hydrogenated C5 Hydrocarbon Resin
CAS: 71700-94-2
SPECS: H51150
The water white thermoplastic hydrocarbon resin obtained from polymerizing of C5 and Hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure senstitive adhesive (HMPSA) because of the good heat resistance and good compatibility with base polymers, such as EVA, SIS.