松醇油
松醇油以松节油为原料,硫酸催化,酒精(或平平加)为乳化剂,经水解反应制得。主要成分为e-萜烯醇,含量约50%左右,尚有萜二醇、烃类化合物及杂质。呈淡黄色到棕红色液体,可燃,微溶于水,在空气中氧化,氧化后,黏度增加。
Substance Identification
| Synonyms | Terpenic Oil |
| CAS | N/A |
| EINECS | N/A |
| FEMA | N/A |
| HS.CODE | N/A |
| Molecular Formula | C10H18O2 |
| Molecular Weight | 154.25 |
Application & Uses
- 由于松醇油起泡性强,能生成大小均匀、黏度中等和稳定性适合的气泡,因此可用作有色金属的优良起泡剂(二号油),在金、银、铜、硫化钼等非铁属硫化物浮选中使用
Sales Specification
| ITEM | VALUE |
|---|---|
| 外观 | 无色到棕红色液体,无固体杂质残留 |
| 相对密度(@ d20/4) | 0.890 min |
| 一元醇含量(%) | 49 min |
| 水分(%) | 0.7 max |
| PH | 6 to 8 |
GHS Hazard Statements
Storage
- 禁止人体直接接触
- 根据相关规定穿戴防护品后处理和运输该物质
- 贮存环境应远离儿童、动物
- 密封贮存于通风、干燥、阴凉处
- 贮存场所必须具备防水工程、接地工程
- 远离火苗、明火、火源
- 密封容器开口后应重新密封贮存,并直立放置防止泄漏
Relation Products
Remark
— Disclaimer —
The above information is believed to be accurate and represents the best explanation currently available to us. However, no liability is assumed for any consequences arising from the use of this content. The technical standards for our products are developed and updated jointly by our customers and ourselves; where any changes occur, the latest specification shall prevail and will be confirmed in the relevant contract.All suggestions and data provided are based on information we consider to be reliable and are offered in good faith, but without any guarantee, as the conditions and methods of use of our products are beyond our control. Foreverest® makes no warranties, whether express or implied, regarding the accuracy, completeness or suitability of this information, and expressly disclaims any implied warranty of fitness for a particular purpose. Prospective users should conduct their own tests and evaluations to determine the suitability of Foreverest® materials and any recommendations for their intended applications before adoption, and, where appropriate, should obtain confirmation or approval from the relevant regulatory authorities.Any references in this page to patents or patented technologies, including descriptive material derived from patents or citations of specific patent numbers, are provided for information only. They must not be interpreted as a recommendation to use our products in a manner that could infringe any third‑party patent, nor as a grant of any licence or permission to use patents owned by Foreverest®.
The above information is believed to be accurate and represents the best explanation currently available to us. However, no liability is assumed for any consequences arising from the use of this content. The technical standards for our products are developed and updated jointly by our customers and ourselves; where any changes occur, the latest specification shall prevail and will be confirmed in the relevant contract.All suggestions and data provided are based on information we consider to be reliable and are offered in good faith, but without any guarantee, as the conditions and methods of use of our products are beyond our control. Foreverest® makes no warranties, whether express or implied, regarding the accuracy, completeness or suitability of this information, and expressly disclaims any implied warranty of fitness for a particular purpose. Prospective users should conduct their own tests and evaluations to determine the suitability of Foreverest® materials and any recommendations for their intended applications before adoption, and, where appropriate, should obtain confirmation or approval from the relevant regulatory authorities.Any references in this page to patents or patented technologies, including descriptive material derived from patents or citations of specific patent numbers, are provided for information only. They must not be interpreted as a recommendation to use our products in a manner that could infringe any third‑party patent, nor as a grant of any licence or permission to use patents owned by Foreverest®.
Start Purchasing
-
Minimum Order Quantity
Quote required -
Lead Time
Quote required -
Available Incoterms
Quote required -
Regional Availability
Quote required